GE GMR06AAPBB Repair

A microwave that quits halfway

The complaint we hear most about microwaves like the GMR06AAPBB is that they start, hum for a short while and then stop. The door matters here: a microwave will not keep running if its door does not register as closed. Check for food residue at the latch edge, a bent door or something wedged in the seal. Wipe the latch area with a damp cloth with the microwave unplugged. If that does not help, the post on a microwave that stops partway goes through other things worth noting.

About the model

GE’s product list shows the GMR06AAPBB as a GE microwave in the Spacemaker group, and BB is the black finish code. GE lists a white version of the same model. The product list gives no capacity for it, so we do not quote one. The label on the case carries the details.

Fault codes you may see

If the display shows an F-code, GE has published meanings for the common ones. F1 and F2 involve the thermal sensor, F3 the touch pad panel, and F4 and F5 the humidity sensor. Every one of those carries the owner advice: call a trained service technician. Take a photo and compare it with F1 or F3 before you call.

The overheating clue

F1 is the thermal sensor code, tied to heat building up inside the cavity. If you ran the microwave empty or for a very long time before the code appeared, say so. Do not run it again until it is cool and inspected.

Do not do these things

Do not run it empty, do not open the outer case, and do not use it if the door is damaged. Sparks, burning smells and smoke are reasons to unplug at once; see our spark post.

The visit

Our visit ends with a written estimate, and the repair waits for your yes. Start at GE microwave repair; for product background, the microwave guide.