GE GTW685BPLDG Repair

Balance in a top-load tub

The GTW685BPLDG is a current GE top-load washer (GTW) with a 4.5 cu ft tub. A top-load tub spins on a vertical axis, and one soaked jacket on one side makes the whole tub wobble. UE, which GE defines as an unbalanced laundry load, is the message to expect. Lift the lid, redistribute, add a light item beside a heavy one, and confirm that the washer stands level on its four feet. Full guidance on the UE code page: GE Washer UE code.

Water in the tub after the end

If the cycle ended and the tub is still holding water, resist the urge to scoop. The washer may have stopped before draining because of a kinked drain hose, a blocked standpipe or a fault we need to see. Read a GE washer that leaves water in the drum. If the water level rose beyond normal, the FE message applies, and GE says to shut off water and power and call service; see GE Washer FE code.

Lid messages

This is an electronic top-load washer, so the lid is monitored. The display can read dE when the lid is open (GE Washer dE code) or Lid after three cycles were started without lifting it (GE Washer Lid code). Both are cured at the lid.

Fabrics and a note on the cycle

We do not have verified cycle names or settings for this washer, so check the owner’s manual for those; what we can say is that pausing a load for more than a day cancels it, as the CAnCELEd message explains in GE Washer CAnCELEd code.

Where it lives

Top-load washers are common in Bay Area garages and basements, where damp air can hasten corrosion on hose fittings. Look at the connections once or twice a year for white crusting or moisture. Close the valves when away for a long trip.

When you book

Give us the exact message, the load that was in the tub and whether the lid closes smoothly. The visit begins with diagnosis and a written estimate that stays on hold until you approve the work. Overview pages: GE Washer Repair, GE Washers.